✨ New Arrivals Just Dropped!Explore
Thermal Extractor Balls
Thermal Extractor Balls are small thermal media spheres offered in multiple materials and two sizes (2.5mm and 3.0mm). This single product page can be set up with variants so shoppers choose the material and size they want from one listing.
Each variant is listed as “enough to fill one Tempest Cap and some extra,” with approximate piece counts per size. Material properties (density, thermal conductivity, and cap filling weight) are provided below for accurate comparison.
FAQs
- What is this product? A set of small thermal media balls sold by material and size as variants on one product page.
- What sizes are available? 2.5mm and 3.0mm (select your size in the variant picker).
- How many pieces do I get? Approximately 100 pieces for 2.5mm and approximately 50 pieces for 3.0mm (actual count may vary by packing).
- Do all variants include the same amount? Each listing states it’s enough to fill one Tempest Cap and some extra, but the total weight differs by material.
- Are these sold as a mixed set? No—each variant corresponds to one selected material and one selected size.
- Is this intended for minors? The source product pages include an 18+ warning; keep out of reach of children and pets.
Total beginner? Read this
- What are “thermal media balls”? Tiny spheres used in some heater assemblies to store and transfer heat.
- Do I need anything else? Yes—these are replacement/option parts and are only useful with compatible hardware that is designed to hold them securely.
- Pick a size: 2.5mm and 3.0mm are the two options—choose the one your setup is designed for.
- Small-parts safety: These are very small components; store securely and keep away from children and pets.
Specs
- Sizes: 2.5mm, 3.0mm
- Approx. piece count: 2.5mm ≈ 100 pcs; 3.0mm ≈ 50 pcs
- Zirconia (ZrO2) density: 5.68 g/cm³
- Zirconia thermal conductivity: 2.5 W/m•K
- Zirconia cap filling weight: 4.1 g
- Stainless Steel density: 7.87 g/cm³
- Stainless Steel thermal conductivity: 16.3 W/m•K
- Stainless Steel cap filling weight: 5.6 g
- SiC (Silicon Carbide) density: 3.21 g/cm³
- SiC (Silicon Carbide) thermal conductivity: 120 W/m•K
- SiC (Silicon Carbide) cap filling weight: 2.2 g
- Quartz density: 2.65 g/cm³
- Quartz thermal conductivity: 3 W/m•K
- Quartz cap filling weight: 1.4 g
- Ruby density: 4.0 g/cm³
- Ruby thermal conductivity: 35 W/m•K
- Ruby cap filling weight: 2.8 g
Notice
- Age restriction: Source material includes an 18+ intended-use warning.
- Responsibility: Keep out of reach of children and pets.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Thermal Extractor Balls
Thermal Extractor Balls
Thermal Extractor Balls are small thermal media spheres offered in multiple materials and two sizes (2.5mm and 3.0mm). This single product page can be set up with variants so shoppers choose the material and size they want from one listing.
Each variant is listed as “enough to fill one Tempest Cap and some extra,” with approximate piece counts per size. Material properties (density, thermal conductivity, and cap filling weight) are provided below for accurate comparison.
FAQs
- What is this product? A set of small thermal media balls sold by material and size as variants on one product page.
- What sizes are available? 2.5mm and 3.0mm (select your size in the variant picker).
- How many pieces do I get? Approximately 100 pieces for 2.5mm and approximately 50 pieces for 3.0mm (actual count may vary by packing).
- Do all variants include the same amount? Each listing states it’s enough to fill one Tempest Cap and some extra, but the total weight differs by material.
- Are these sold as a mixed set? No—each variant corresponds to one selected material and one selected size.
- Is this intended for minors? The source product pages include an 18+ warning; keep out of reach of children and pets.
Total beginner? Read this
- What are “thermal media balls”? Tiny spheres used in some heater assemblies to store and transfer heat.
- Do I need anything else? Yes—these are replacement/option parts and are only useful with compatible hardware that is designed to hold them securely.
- Pick a size: 2.5mm and 3.0mm are the two options—choose the one your setup is designed for.
- Small-parts safety: These are very small components; store securely and keep away from children and pets.
Specs
- Sizes: 2.5mm, 3.0mm
- Approx. piece count: 2.5mm ≈ 100 pcs; 3.0mm ≈ 50 pcs
- Zirconia (ZrO2) density: 5.68 g/cm³
- Zirconia thermal conductivity: 2.5 W/m•K
- Zirconia cap filling weight: 4.1 g
- Stainless Steel density: 7.87 g/cm³
- Stainless Steel thermal conductivity: 16.3 W/m•K
- Stainless Steel cap filling weight: 5.6 g
- SiC (Silicon Carbide) density: 3.21 g/cm³
- SiC (Silicon Carbide) thermal conductivity: 120 W/m•K
- SiC (Silicon Carbide) cap filling weight: 2.2 g
- Quartz density: 2.65 g/cm³
- Quartz thermal conductivity: 3 W/m•K
- Quartz cap filling weight: 1.4 g
- Ruby density: 4.0 g/cm³
- Ruby thermal conductivity: 35 W/m•K
- Ruby cap filling weight: 2.8 g
Notice
- Age restriction: Source material includes an 18+ intended-use warning.
- Responsibility: Keep out of reach of children and pets.
Select Size
Select Option
From $12.00
Thermal Extractor Balls—
$12.00
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Thermal Extractor Balls are small thermal media spheres offered in multiple materials and two sizes (2.5mm and 3.0mm). This single product page can be set up with variants so shoppers choose the material and size they want from one listing.
Each variant is listed as “enough to fill one Tempest Cap and some extra,” with approximate piece counts per size. Material properties (density, thermal conductivity, and cap filling weight) are provided below for accurate comparison.
FAQs
- What is this product? A set of small thermal media balls sold by material and size as variants on one product page.
- What sizes are available? 2.5mm and 3.0mm (select your size in the variant picker).
- How many pieces do I get? Approximately 100 pieces for 2.5mm and approximately 50 pieces for 3.0mm (actual count may vary by packing).
- Do all variants include the same amount? Each listing states it’s enough to fill one Tempest Cap and some extra, but the total weight differs by material.
- Are these sold as a mixed set? No—each variant corresponds to one selected material and one selected size.
- Is this intended for minors? The source product pages include an 18+ warning; keep out of reach of children and pets.
Total beginner? Read this
- What are “thermal media balls”? Tiny spheres used in some heater assemblies to store and transfer heat.
- Do I need anything else? Yes—these are replacement/option parts and are only useful with compatible hardware that is designed to hold them securely.
- Pick a size: 2.5mm and 3.0mm are the two options—choose the one your setup is designed for.
- Small-parts safety: These are very small components; store securely and keep away from children and pets.
Specs
- Sizes: 2.5mm, 3.0mm
- Approx. piece count: 2.5mm ≈ 100 pcs; 3.0mm ≈ 50 pcs
- Zirconia (ZrO2) density: 5.68 g/cm³
- Zirconia thermal conductivity: 2.5 W/m•K
- Zirconia cap filling weight: 4.1 g
- Stainless Steel density: 7.87 g/cm³
- Stainless Steel thermal conductivity: 16.3 W/m•K
- Stainless Steel cap filling weight: 5.6 g
- SiC (Silicon Carbide) density: 3.21 g/cm³
- SiC (Silicon Carbide) thermal conductivity: 120 W/m•K
- SiC (Silicon Carbide) cap filling weight: 2.2 g
- Quartz density: 2.65 g/cm³
- Quartz thermal conductivity: 3 W/m•K
- Quartz cap filling weight: 1.4 g
- Ruby density: 4.0 g/cm³
- Ruby thermal conductivity: 35 W/m•K
- Ruby cap filling weight: 2.8 g
Notice
- Age restriction: Source material includes an 18+ intended-use warning.
- Responsibility: Keep out of reach of children and pets.
